Blog · · 4 min read

HVAC no-heat calls: the questions to ask before you dispatch

On the first cold night every furnace that was going to fail does. The questions an HVAC website chat should ask a no-heat visitor before a tech rolls.

A no-heat call is the call every HVAC company gets on the first cold night of the year, and gets all at once. The furnace that limped through last winter quits at bedtime, the homeowner searches “furnace not working” from under a blanket, and every office in town is closed. The company whose website asks them four questions and promises a callback gets the job. The company with a phone number gets a voicemail, maybe.

This post is about those four questions: what they are, what each one tells your dispatcher, and what the chat must never say to a homeowner standing next to a gas appliance.

The first cold night

Heating failures are not spread evenly across the winter. They cluster on the first hard freeze, when every marginal system is asked to run for the first time in months. That night the phone rings more than any night of the year, the answering service takes names, and the on-call tech cannot call anyone back because the phone is still ringing.

A chat does not have a line. Every visitor gets asked the same questions at the same time, and every lead lands on the on-call tech’s phone in the order it came in, with the answers on it. The after-hours side of HVAC and plumbing is covered elsewhere. This is about what to ask.

The questions, in order

After the visitor taps “No heat”:

  1. Furnace, heat pump or not sure?
  2. Is it running but blowing cold, or not running at all?
  3. How old is the system? Under five years, Five to fifteen, Over fifteen, Not sure.
  4. Is this an emergency right now? Yes, No.
  5. Name, best phone, email.

Then the line that keeps them from calling the next company: someone will be in touch shortly.

What each answer does for dispatch

Question What it tells you before the truck rolls
Furnace or heat pump Which tech, which parts, and whether the homeowner can safely wait
Running or not Roughly where the problem is, and whether it is a power or control issue
Age Repair visit, or the start of a replacement conversation
Emergency right now Tonight, or first thing in the morning

None of this is a diagnosis. It is the same sorting a good dispatcher does on the phone, done by the website while the dispatcher is asleep. The tech arrives knowing what they are walking into instead of finding out at the door.

What the chat must never do

  • Troubleshoot. Not “check the breaker,” not “try the pilot light,” not “replace the filter.” A chatbot that answers will give steps, and steps for a gas furnace given by software, at night, in writing, are a liability. The chat asks. The tech talks them through it on the phone if that is the right call.
  • Quote. No service call price, no “a new system usually runs about.” The chat has not seen the unit.
  • Reassure. Not “that sounds minor.” The chat does not know.

The visitor does not need advice at 11 PM. They need to know someone is coming. The chat gives them that and nothing else.

What the on-call tech gets

The lead lands by text:

No heat · Furnace · Not running · Over fifteen years · Emergency: Yes Carlos Mendez, (915) 555-0142 11:38 PM, from the Heating page

And by email to the office with the same answers. With Supr Chat the lead also carries a 1 to 5 score and a one-line summary, so on a cold night with a screen full of leads the tech sees “furnace, not running, emergency” on top and “heat pump, blowing cold, not urgent” further down. What a notification like this should carry, and why the order matters, is in What a good lead notification looks like.

Tonight or in the morning

The emergency question is the one that decides dispatch. A yes with an old furnace that is not running is a call back in minutes and a truck tonight. A no with a heat pump blowing a little cool is a call at 7 AM and a slot in the morning. Without the question, every no-heat lead looks the same, and the tech either rolls on all of them or none. For why the fast callback wins the job, read Speed to lead.

Spanish-speaking homeowners

On a cold night a share of the homeowners searching are more comfortable in Spanish, and a furnace question in stiff machine-translated Spanish loses them. The chat should switch in one tap, with the questions written naturally, and the lead should note which language they used so the right tech calls. More in Bilingual website chat.

Getting it on your site

Supr Chat for HVAC companies reads your website, builds the no-heat, no-cooling, new-system and maintenance flows in English and Spanish, and goes live with one line of code in your site’s footer before the next cold snap. Edit any question in the app. Every lead lands on the on-call tech’s phone by text and in your inbox by email, scored, and we connect it to the CRM you already use. Start a free trial: 14 days, no credit card, no contract.

Frequently asked questions

What should an HVAC company ask on a no-heat call?

Furnace, heat pump or not sure. Running but blowing cold, or not running at all. How old the system is. And whether it is an emergency right now. Then name, phone and email. Four taps, and the on-call tech knows what to bring and how fast.

Should the website chat tell the homeowner to check the thermostat or the filter?

No. The chat asks; it does not troubleshoot. A chatbot that hands out steps for a gas appliance will eventually hand out a wrong one in writing. Leave the walkthrough to the tech on the phone.

How do HVAC companies handle the first cold night of the year?

The phone cannot take everyone at once. A chat on every page can. It asks each visitor the same questions, sends every lead to the on-call tech by text with the answers, and scores them so the emergencies come first.

Does the system's age matter on a no-heat call?

Yes. It tells the tech whether this is a repair visit or the start of a replacement conversation, and it hints at what parts to bring. Asking it in the chat means the tech knows before the drive.

How does the on-call tech get a no-heat lead at night?

By text, the moment the visitor finishes, with the four answers, the name and the phone number. With Supr Chat the lead also carries a 1 to 5 score and a one-line summary, and an email copy goes to the office.

Keep reading

# HVAC no-heat calls: the questions to ask before you dispatch

*November 11, 2026 · Supr Chat*

On the first cold night every furnace that was going to fail does. The questions an HVAC website chat should ask a no-heat visitor before a tech rolls.

A no-heat call is the call every HVAC company gets on the first cold night of the year, and gets all at once. The furnace that limped through last winter quits at bedtime, the homeowner searches "furnace not working" from under a blanket, and every office in town is closed. The company whose website asks them four questions and promises a callback gets the job. The company with a phone number gets a voicemail, maybe.

This post is about those four questions: what they are, what each one tells your dispatcher, and what the chat must never say to a homeowner standing next to a gas appliance.

## The first cold night

Heating failures are not spread evenly across the winter. They cluster on the first hard freeze, when every marginal system is asked to run for the first time in months. That night the phone rings more than any night of the year, the answering service takes names, and the on-call tech cannot call anyone back because the phone is still ringing.

A chat does not have a line. Every visitor gets asked the same questions at the same time, and every lead lands on the on-call tech's phone in the order it came in, with the answers on it. The [after-hours side of HVAC and plumbing](/blog/hvac-plumbing-after-hours-leads) is covered elsewhere. This is about what to ask.

## The questions, in order

After the visitor taps "No heat":

1. **Furnace, heat pump or not sure?**
2. **Is it running but blowing cold, or not running at all?**
3. **How old is the system?** Under five years, Five to fifteen, Over fifteen, Not sure.
4. **Is this an emergency right now?** Yes, No.
5. **Name, best phone, email.**

Then the line that keeps them from calling the next company: someone will be in touch shortly.

## What each answer does for dispatch

| Question | What it tells you before the truck rolls |
|---|---|
| Furnace or heat pump | Which tech, which parts, and whether the homeowner can safely wait |
| Running or not | Roughly where the problem is, and whether it is a power or control issue |
| Age | Repair visit, or the start of a replacement conversation |
| Emergency right now | Tonight, or first thing in the morning |

None of this is a diagnosis. It is the same sorting a good dispatcher does on the phone, done by the website while the dispatcher is asleep. The tech arrives knowing what they are walking into instead of finding out at the door.

## What the chat must never do

- **Troubleshoot.** Not "check the breaker," not "try the pilot light," not "replace the filter." A chatbot that answers will give steps, and steps for a gas furnace given by software, at night, in writing, are a liability. The chat asks. The tech talks them through it on the phone if that is the right call.
- **Quote.** No service call price, no "a new system usually runs about." The chat has not seen the unit.
- **Reassure.** Not "that sounds minor." The chat does not know.

The visitor does not need advice at 11 PM. They need to know someone is coming. The chat gives them that and nothing else.

## What the on-call tech gets

The lead lands by text:

> **No heat** · Furnace · Not running · Over fifteen years · Emergency: Yes
> Carlos Mendez, (915) 555-0142
> 11:38 PM, from the Heating page

And by email to the office with the same answers. With Supr Chat the lead also carries a 1 to 5 score and a one-line summary, so on a cold night with a screen full of leads the tech sees "furnace, not running, emergency" on top and "heat pump, blowing cold, not urgent" further down. What a notification like this should carry, and why the order matters, is in [What a good lead notification looks like](/blog/what-a-good-lead-notification-looks-like).

## Tonight or in the morning

The emergency question is the one that decides dispatch. A yes with an old furnace that is not running is a call back in minutes and a truck tonight. A no with a heat pump blowing a little cool is a call at 7 AM and a slot in the morning. Without the question, every no-heat lead looks the same, and the tech either rolls on all of them or none. For why the fast callback wins the job, read [Speed to lead](/blog/speed-to-lead-the-first-call).

## Spanish-speaking homeowners

On a cold night a share of the homeowners searching are more comfortable in Spanish, and a furnace question in stiff machine-translated Spanish loses them. The chat should switch in one tap, with the questions written naturally, and the lead should note which language they used so the right tech calls. More in [Bilingual website chat](/blog/bilingual-website-chat-spanish-speaking-customers).

## Getting it on your site

[Supr Chat for HVAC companies](/hvac) reads your website, builds the no-heat, no-cooling, new-system and maintenance flows in English and Spanish, and goes live with one line of code in your site's footer before the next cold snap. Edit any question in the app. Every lead lands on the on-call tech's phone by text and in your inbox by email, scored, and we connect it to the CRM you already use. [Start a free trial](https://suprchat.ai/start): 14 days, no credit card, no contract.

## Frequently asked questions

### What should an HVAC company ask on a no-heat call?

Furnace, heat pump or not sure. Running but blowing cold, or not running at all. How old the system is. And whether it is an emergency right now. Then name, phone and email. Four taps, and the on-call tech knows what to bring and how fast.

### Should the website chat tell the homeowner to check the thermostat or the filter?

No. The chat asks; it does not troubleshoot. A chatbot that hands out steps for a gas appliance will eventually hand out a wrong one in writing. Leave the walkthrough to the tech on the phone.

### How do HVAC companies handle the first cold night of the year?

The phone cannot take everyone at once. A chat on every page can. It asks each visitor the same questions, sends every lead to the on-call tech by text with the answers, and scores them so the emergencies come first.

### Does the system's age matter on a no-heat call?

Yes. It tells the tech whether this is a repair visit or the start of a replacement conversation, and it hints at what parts to bring. Asking it in the chat means the tech knows before the drive.

### How does the on-call tech get a no-heat lead at night?

By text, the moment the visitor finishes, with the four answers, the name and the phone number. With Supr Chat the lead also carries a 1 to 5 score and a one-line summary, and an email copy goes to the office.